● 2Ch Digital stereo power amplifier
● High performance, reliability, light-weight switching power supply
● Remote monitoring(input, output, operating condition, temperature) data port applied multiple protective circuit for
protecting product Speakon and terminal block are applied to connect to the input line easily
● XLR signal link socket is applied to consider of the extension of amplifier
● Delay circuit is applied to prevent rush current when it is turned on at the first stage.
● Digital controlled simple design
● LED shows choosing function, operating condition, volume, level, and so on.
● Remote power control
CTX 900E
Digital stereo power amplifier
|
Specification |
CTX 900E |
|
Stereo mode output 2Ω |
680W |
|
Stereo mode output 4Ω |
450W |
|
Stereo mode output 8Ω |
275W |
|
Bridge mode output 4Ω |
1360W |
|
Bridge mode output 8Ω |
900W |
|
Bridge mode output 16Ω |
550W |
|
Input sensitivity(@8Ω, RMS) |
1.45V |
|
Gain @8Ω |
30.2dB |
|
LCD display |
All mode function is blue light on the back side |
|
Amplifier protective ability |
10 faults protection/security |
|
Signal to noise ratio |
>-106dB |
|
T.H.D(1kHz@10dB,8Ω) |
<0.05% |
|
Frequency response |
± 0.2dB@ 20Hz~20KHz |
|
Input impedance |
12kΩ balanced, 6kΩ unbalanced |
|
Damping factor |
>500 |
|
Output circuit |
Class AB |
|
Full power |
8Ω 6.9A/ 4Ω 11.5A/ 2Ω 18.5A |
|
Rated voltage |
AC220V/60Hz |
|
Consumption power(4Ω) |
860W |
|
Dimension(W x H x D) |
483 x 88 x 333mm |
|
Weight |
10.2kg |
