DCS 7200 Series is conference system which is controlled by digital signal. To prevent malfunction due to the affect of noise, it applies
R485 data communication mode and carries out long distance transmission. Especially with the link system of 'T-connector', it is designed and set conveniently and safely. Built-in microphone tracking camera makes the easier video conference system.
Classy and simple designed and high quality of microphone unit were applied. Also, ID is created with DIP switch.
Intuitive LED display is attached. Multiple microphone for chairman can be connected.
It is intelligent system which is suitable for all conferences and the whole video/audio data in the conferences can be recorded in the
level of HD/SD automatically.
All functions are controlled by GUI touch screen and PC control.
The camera automatically tracks the speaker during the conference.
|
|
|
DCS 7200MC |
|
Main controller |
|
|
|
|
DCS 7200CR |
DCS 7200DR |
|
Microphone for chairman |
Microphone for delegates |
DCS 7200RC
Conference System Controller
|
|
Specification |
Specification |
Remark |
|
Ralated to
managing conference |
operating mode |
Standard mode
/ Extended control mode |
- |
|
Setting the number of speaker |
Free Mode
User Mode : 1~5
FiFo Mode : 1~5 |
Unlimited
Simultaneous use
Push-driven |
|
Reservation mode |
None / 1 ~ 5 |
- |
|
Auto Mic OFF |
None / 3 ~30sec. |
Auto turn-off without speech
after determined time limit |
|
Auto Mic ON |
Activate / Deactivate |
Auto turn-on with speech |
|
Emergency speaking |
Activate / Deactivate |
- |
|
The number of participant setting |
- |
- |
|
Related to system |
Camera position Interface |
RJ-485,
16 position switch point of contact |
DIP SW ID designation |
|
Effect sound |
Voice or melody sound effects
/ background music transmission |
- |
|
System specification |
Main connection |
D-SUB 9Pin cable |
Main to T-connection
/ 40set per 4 port |
|
Sub connection |
UTP 8Pin cable |
T-connector to unit |
|
Main power Amplifier |
60W RMSx2(120W) |
VDS-7000 with 60W |
|
Line IN/OUT |
0dBM |
Balanced XLR |
|
AUX IN/OUT |
-10dBM |
Unbalanced RCA |
|
Current consumption |
400 W Max |
@ AC 220V/60Hz |
|
Power fuse |
8A 250V |
- |
|
Maximum unit number for connection
|
120 sets
(1ea of main controller) |
- |
|
240 sets
(additional power supply needed) |
- |
