DCS 8200 Series is conference system which is controlled by digital signal. To prevent malfunction due to the affect of noise, it applies
R485 data communication mode and carries out long distance transmission. Especially with the link system of 'T-connector', it is designed
and set conveniently and safely. Built-in microphone tracking camera makes the easier video conference system.
Accurate electronic voting control / total / result analysis in real time and simultaneous interpretation are the features of DCS 8200.
It is intelligent system which is suitable for all conferences and the whole video/audio data in the conferences can be recorded in the
level of HD/SD automatically.
All functions are controlled by GUI touch screen and PC control.
The camera automatically tracks the speaker during the conference.
|
|
|
DCS 8200MC |
|
Main controller |
|
|
|
|
DCS 8200CR |
DCS 8200DR |
|
Microphone for chairman |
Microphone for delegates |
DCS 8200RC
Conference System Controller |
|
Specification |
Specification |
Remark |
|
Ralated to
managing conference |
operating mode |
Standard mode
/ Extended control mode |
- |
|
Setting the number of speaker |
Free Mode
User Mode : 1~5
FiFo Mode : 1~5 |
Unlimited
Simultaneous use
Push-driven |
|
Reservation mode |
None / 1 ~ 5 |
- |
|
Auto Mic OFF |
None / 3 ~30sec. |
Auto turn-off without speech
after determined time limit |
|
Auto Mic ON |
Activate / Deactivate |
Auto turn-on with speech |
|
Emergency speaking |
Activate / Deactivate |
- |
|
Electronic voting |
Voting time control |
- |
|
The number of participant setting |
- |
- |
|
Related to system |
Camera position Interface |
RJ-485,
16 position switch point of contact |
DIP SW ID designation |
|
Effect sound |
Voice or melody sound effects
/ background music transmission |
- |
|
Simultaneous interpretation |
Headphone / microphone |
|
|
System specification |
Main connection |
D-SUB 9Pin cable |
Main to T-connection
/ 40set per 4 port |
|
Sub connection |
UTP 8Pin cable |
T-connector to unit |
|
Main power Amplifier |
60W RMSx2(120W) |
- |
|
Line IN/OUT |
0dBM |
Balanced XLR |
|
AUX IN/OUT |
-10dBM |
Unbalanced RCA |
|
Current consumption |
400 W Max |
@ AC 220V/60Hz |
|
Power fuse |
8A 250V |
- |
|
Maximum unit number for connection
|
120 sets
(1ea of main controller) |
- |
|
240 sets
(additional power supply needed) |
- |
