● The previous model has been improved so that it works in many different places and the design is sophisticated and is combined
with solid chassis.
● High damping and low T.H.D gives powerful and delicate sound.
● Europe type Speakon terminal and binding post speaker terminal are combined together so it is easy for customers to install and
connect to the speaker.
● On input terminal, XLR and 1/4 phone jack are applied to connect with any exterior devices.
● Amplifier mode switch makes user feel easy to control stereo and mono bridge system.
● In case of poor environmental condition, overcurrent cause of excessive operating device, overheat, short-circuit from exterior line,
direct current, there is perfect protective circuit to save the amplifier.
● It can be used at any kind of concert hall, cafe, bar, church, institute, seminar, conference room, etc.
CA 902E
Professional Amplifier
Specification |
CA 902E |
Stereo mode output 4Ω |
450W |
Stereo mode output 8Ω |
300W |
Mode bridge output 8Ω |
900W |
Frequency response(1kHz, rated power) |
20Hz~30kHz |
Power bandwidth |
20Hz~20kHz |
EIN |
-110dB |
Remaining noise(Speaker output jack) |
-70dB |
Signal to noise(A- Weighted) |
>100dB |
Damping factor(8Ω, 50Hz) |
300 |
Strait(8Ω, 1kHz rated power) |
28v/Usec |
4Ω stereo output |
>0.05% |
8Ω stereo output |
>0.05% |
Intermodulation distortion |
0.05% |
Channel Separation ratio(1kHz) |
-70dB |
Input level |
0dbm(0.775v) |
Microphone (equilibrium) |
15kΩ |
LED indicator |
Power on, Protect, Monobridge, signal, Peak |
Connecters |
XLR input, 1.4"input, Speakon output jack |
Protection circuit |
Speaker output short circuit, DC detection circuit,
AC fuse, Soft power circuit |
Consumption power(120V,220V,240V,50/60Hz) |
1500W |
Dimension(W x H x D) |
483 x 88 x 407mm |
Weight |
18kg |